MSW Motor Technics MTC-350 Manual De Instrucciones página 4

EN
TECHNICAL DATA
Description Value
of the parameter of the parameter
MANUAL TYRE
Name of the product
CHANGER
Model MSW-MTC-350
Dimensions [Width
1100x680x1270
x Depth x Height; mm]
Weight [kg] 26
Permissible wheel
14''-17''
dimensions ["]
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
EXPLANATION OF SYMBOLS
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Wear protective gloves.
Wear foot protection.
ATTENTION! Hand crush hazard!
CAUTION! Hanging load!
Wear protective goggles.
CAUTION! The figures in this manual are illustrative
only and may vary in some details from the actual
appearance of the product.
2. USAGE SAFETY
ATTENTION! Read all safety warnings
instructions. Failure to follow warnings and
instructions could result in serious injury or even
death.
6
U S E R M A N U A L
The term "device" or "product" in the warnings and
instructions refers to the tire changer.
2.1. SAFETY IN THE WORK AREA
a) Keep the work area tidy and well lit. Disorder or poor
lighting can lead to accidents. Be careful, watch what
you are doing and use common sense when working
with the device.
b) If in doubt as to whether the device is working
properly, contact the manufacturer's service.
c) Repairs to the device may only be carried out by
the manufacturer's service. Do not carry out repairs
yourself!
d) No children or unauthorised persons are allowed in
the work area. (Lack of attention may result in loss of
control over the device).
e) Check the condition of the safety stickers regularly.
Replace them if they are illegible.
f) Keep these instructions for future reference. If
the device is to be passed on to third parties, the
and
instructions for use must be handed over together
with the device.
g) Keep packaging parts and small assembly parts out of
the reach of children.
h) Keep the device away from children and animals
i) When using this device together with other devices,
the other instructions for use must also be followed.
REMEMBER! When using the device, protect
children and other bystanders.
2.2. PERSONAL SAFETY
a) Do not operate the device if you are tired, ill or under
the influence of alcohol, drugs or medication which
might impair your ability to operate the device.
b) The device may only be operated by persons who are
physically fit, capable of handling the device and who
have been adequately trained, who have read these
instructions and have received training in health and
safety.
c) The device is not intended to be used by persons
(including children) with reduced mental, sensory or
intellectual functions or lack of experience and/or
knowledge, unless they are supervised by a person
responsible for their safety or have been given
instructions by them on how to operate the device.
d) Be careful and use common sense when operating
the device. A short moment of distraction during
operation may lead to serious personal injury.
e) Use the required personal protective equipment
when working with the device specified in section 1
of the explanation of symbols. The use of appropriate,
approved personal protective equipment reduces the
risk of injury.
f) Do not overestimate your capabilities. Maintain body
balance at all times during operation. This allows for
better control of the device in unexpected situations.
g) Do not wear loose clothing or jewellery. Keep hair,
clothing and gloves away from moving parts. Loose
clothing, jewellery or long hair can be caught by
moving parts.
h) The device is not a toy. Children should be supervised
to ensure that they do not play with the device.
and
Rev. 18.10.2022
2.3. SAFE USE OF THE DEVICE
a) Do not overload the device. Use tools that are suitable
for the given application. A correctly selected device
ensures better and safer performance of work.
b) Keep unused devices out of the reach of children
and anyone not familiar with the device or these
instructions. Devices are dangerous in the hands of
inexperienced users.
c) Keep the device in good working order. Before each
use, check for general damage or damage to moving
parts (cracks in parts and components or any other
condition that may affect the safe operation of the
device). If damaged, have the device repaired before
use.
d) Keep the device out of the reach of children.
e) Repair and maintenance of the device should be
carried out by qualified persons using only original
spare parts. This will ensure a safe use of the device.
f) To ensure the designed operational integrity of the
device, do not remove factory-installed covers or
loosen any screws.
g) When transporting and moving the device from the
place of storage to the place of use, follow the health
and safety regulations for manual transport that apply
in the country in which the device is used.
h) Avoid situations where the device stops under heavy
load during operation. This can cause overheating of
the drive elements and subsequent damage to the
device.
i) It is forbidden to move, shift or rotate the device
during operation.
j) Clean the device regularly to prevent the permanent
accumulation of dirt.
k) Do not work with two objects at the same time.
l) The device is not a toy. Cleaning and maintenance
must not be performed by children without adult
supervision.
m) It is forbidden to tamper with the device in order to
change its parameters or construction.
n) Keep the device away from sources of fire and heat.
o) Do not overload the device.
p) Nuts, bolts, tools and other objects must not be left
loose on the device as they can get between the parts
while the device is being operated.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The device serves for installing and removing tires from car
wheels.
The user is liable for any damage resulting from
unintended use of the device.
Rev. 18.10.2022
EN
3.1. DESCRIPTION
3.1. PREPARATION FOR WORK
Vent the tires before using the tire changer.
LOCATION OF THE DEVICE
Always operate the device on a level, stable, clean, fireproof
and dry surface and out of the reach of children and persons
with reduced mental, sensory and intellectual abilities.
ASSEMBLY OF THE DEVICE
ATTENTION! This product's exploded view can be
found on the last pages of the operating instructions
(pp. 30).
Mount the rim support on the top of the stand (1). Install the
lever socket by tightening it to the stand at the designated
location (2). Attach the tire spoon (3) to the bottom of the
socket. Finally, insert the lever into the socket and fasten (4).
Use the included mounting hardware, such as screws, for
assembly.
The kit includes an auxiliary rod. The thicker end of the rod
is used to pull the tire off the rim and the flat end is used to
fit a new tire.
3.2. WORKING WITH THE DEVICE
1. Vent the tire and place the wheel under the lever.
2. Align the spoon with the point where the tire overlaps
the rim. Pull down firmly on the lever so that the
spoon removes the tire from the rim. Move the wheel
and repeat in several places as required, then turn the
wheel to the other side and pull the tire off the rim in
the same way (5.1 and 5.2).
7