Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT USE
Magnetic emergency stop system
The product is equipped with a "magnetic emergency stop system". This safety strap must
be attached to the console for it to work. It is designed to attach to clothing so that if you
walk off or fall off the treadmill, it will stop automatically, helping to prevent injury.
Before starting a workout, make sure the safety strap is properly attached to the console
and that the clip is securely attached to your clothing.
WARNING! If the device is switched on, but the safety strap is not connected, "- - -"
appears on the display and the device cannot be started.
Commissioning
The equipment has a computerised display that provides you with controls for the
operation of the unit, as well as information about the workout, duration, speed, distance
travelled, etc. To use the equipment:
1.
Plug the equipment into a mains socket.
2.
Turn the power switch, located on the front of the unit, to the "ON" ("I") position.
3.
Fix the safety strap to the console.
Your tape is ready!
BEWARE! Always stand on the side rails before starting the machine. Never stand on the
belt and then start the machine.
power switch
Display
The display shows current information, such as current speed, elapsed or remaining time, calories remaining,
etc.
Safety key function
Unplug the safety key and window display "E7" the treadmill stop running, and beep alarm sound appears, the
electronic watch display 2 seconds when put on the safety key, all data zero.
Turn on the equipment
Increase speed
Safety key
When the safety key is
removed, "---" will be displayed
and the treadmill will stop
quickly, and the alarm will sound.
18
Turn off the equipment
Reduce speed
EN - MC-120
Publicidad
