LAVOR Pro GV8,6 Manual De Instrucciones página 17

- A
LL THE MAINTENANCE AND ADJUSTMENT ACTIVITIES DESCRIBED IN THIS HANDBOOK MUST BE CARRIED
OUT ONLY AFTER STOPPING THE MACHINE (MAIN SWITCH TURNED TO
POWER CORD, IF NOT CLEARLY INDICATED THAT THE OPERATION MUST BE CARRIED OUT WHEN THE
MACHINE IS ON.
- A
LL THE ADJUSTMENT AND ACTIVITIES THAT ARE NOT DESCRIBED IN THIS HANDBOOK MUST BE CARRIED
OUT BY QUALIFIED AND SKILLED OPERATORS TO AVOID ANY ACCIDENT OR DAMAGE TO THE MACHINE AND
TO THE OPERATOR.
C
AREFULLY READ THIS OPERATING HANDBOOK BEFORE USE.
I
T PROVIDES IMPORTANT INFORMATION ABOUT A SAFE INSTALLATION, USE AND MAINTENANCE OF THE
MACHINE.
T
- HE NON-COMPLIANCE WITH THE SAFETY MEASURES MAY ENTAIL SERIOUS INJURIES TO THE OPERATOR
AND DAMAGES TO THE MACHINE.
C
- AREFULLY KEEP THIS HANDBOOK FOR CONSULTATION PURPOSES UP TO THE MACHINE FINAL DISMANTLING.
T
HE USE AND MAINTENANCE ACTIVITIES MUST BE CARRIED OUT CORRECTLY; OTHERWISE, THE
CANNOT BE HELD RESPONSIBLE FOR THE DAMAGES TO PEOPLE, ANIMALS OR THINGS DERIVING FROM
THE NON-COMPLIANCE WITH THE FOLLOWING INSTRUCTIONS.
C
- HECK THAT BOTH THE MACHINE AND ITS COMPONENTS ARE UNDAMAGED WHEN UNPACKING THEM.
C
ONTACT YOUR RESELLER IN CASE OF DOUBTS.
- T
HE INSTALLATION MUST BE CARRIED OUT BY SKILLED OPERATORS, ACCORDING TO THE
M
INSTRUCTIONS. AKE SURE THAT THE RATING CORRESPONDS TO THE FACTORY POWER LINE BEFORE
ENERGISING THE MACHINE.
CASE OF DOUBTS, CONTACT HIGHLY SKILLED OPERATORS FOR A THOROUGH INSPECTION.
- D
E-ENERGISE THE MACHINE BEFORE ANY CLEANING OR MAINTENANCE ACTIVITY.
- N
EVER LEAVE THE MACHINE ENERGISED IF UNUSED.
- D
E-ENERGISE THE MACHINE IN CASE OF FAILURE AND / OR TROUBLES.
CONTROLS AND EQUIPMENT.
SERVICING PURPOSES AND ALWAYS ORDER ORIGINAL SPARE PARTS.
- T
HE DRAINING AND LOADING PIPES, THE SAFETY SHEATHS AND THE SOLENOID VALVES MUST NOT BE CUT
AND TAMPERED WITH.
- A
NY USE OF THE MACHINE OTHER THAN THE ONE IT HAS BEEN BUILT FOR REPRESENTS AN ANOMALOUS
CONDITION AND CAN CAUSE SERIOUS DAMAGES TO THE OPERATING MEANS AND ENTAIL A SERIOUS RISK
FOR THE OPERATOR USING IT.
- N
EVER REMOVE OR HIDE THE WARNING LABELS APPLIED TO THE MACHINE FRONT AND SIDE PARTS.
- T
HE SAME INSTRUCTIONS ARE VALID FOR VARIOUS MODELS; SOME DETAILS MAY DIFFER ACCORDING TO
THE MACHINE MODEL.
F
URTHERMORE:
A
FEW FUNDAMENTAL RULES COMMON TO ANY ELECTRICALLY POWERED MACHINES MUST ALSO BE
OBSERVED:
I
N PARTICULAR:
N
- EVER TOUCH OR START THE MACHINE WITH WET HANDS OR BARE FEET;
R
- EMOVE THE CASINGS AND THE DOORS OF THE ELECTRIC BOARDS ONLY ONCE THE MACHINE HAS BEEN
STOPPED AND DE-ENERGISED;
N
- EVER PULL THE POWER CABLE TO DISCONNECT THE PLUG FROM THE SOCKET.
F
OR FIRE-PREVENTION PURPOSES:
K
- EEP ALL INFLAMMABLE OR COMBUSTIBLE PRODUCTS AWAY FROM THE EQUIPMENT AREA.
O
-
BVIOUSLY, THE ABOVE-MENTIONED INSTRUCTIONS ARE NOT SUFFICIENT TO PREVENT ALL SORTS OF
ACCIDENTS; THEREFORE, THE
T
- HE MACHINE MUST NOT BE MODIFIED OR CHANGED IN ANY WAY WITHOUT THE
AUTHORISATION.
MAIN WARNINGS
T
HE MACHINE IS ELECTRICALLY SAFE ONLY WHEN PROPERLY GROUNDED.
J
UST CONTACT THE AUTHORISED AFTER-SALES SERVICE POINTS FOR
D
E-ENERGISE THE MACHINE IN CASE OF DAMAGES
U
SER WILL HAVE TO BE CAUTIOUS.
OFF
T
URN THE MAIN SWITCH OFF.
D
) AND DISCONNECTING THE
B
UILDER
B
UILDER'S
O NOT TAMPER WITH ITS
B
UILDER'S WRITTEN
I
N