Publicidad
Idiomas disponibles
Idiomas disponibles
FEATURES
PRODUCT SPECIFICATIONS
Motor .......................................................................................................................................................................18 Volt DC
Bar Length ....................................................................................................................................................................... 12 in.
Maximum Chain Speed .................................................................................................................................................10 m/s
Chain oil tank capacity .................................................................................................................................................. 7.3 oz.
NOTE: This saw was designed for occasional light duty use and has some limitations as to what it can cut.
KNOW YOUR CHAINSAW
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
CHAIN TENSIONING SCREW
This feature allows user to adjust the tension of the chain.
CHAIN BRAKE / FRONT HAND GUARD
The chain brake is designed to quickly stop the chain from
rotating. When the chain brake / front hand guard is pushed
toward the bar, the chain should stop immediately. The chain
brake does not prevent kickback.
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the Packing
List are included.
WARNING:
Do not use this product if it is not completely as-
sembled or if any parts appear to be missing or
damaged. Use of a product that is not properly
and completely assembled could result in serious
personal injury.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
GUIDE BAR
The factory-equipped guide bar has a small radius tip that
offers a somewhat lower kickback potential.
LOCK-OUT BUTTON
A control feature designed to prevent the motor from being
accidently started.
LOW KICKBACK SAW CHAIN
The low kickback saw chain helps minimize the force of a
kickback reaction by preventing the cutters from digging in
too deeply at the kickback zone.
SPIKED BUMPER
Factory equipped plastic teeth for use when felling or buck-
ing to pivot the saw and maintain position while sawing.
SWITCH TRIGGER
Squeeze the switch trigger to operate the unit after lock-out
button has been pushed in. Release the switch trigger to
stop the unit.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACKING LIST
Chainsaw with Scabbard
Combination Wrench
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of
this product with damaged or missing parts could
result in serious personal injury.
10 — English
Publicidad
