Operation; Energy Saving Tips; Using The Cooler - Mobicool T25 DC/AC Instrucciones De Uso

_T-25_30_DCAC.book Seite 9 Montag, 29. November 2004 4:47 16
T25 DC/AC, T30 DC/AC
6

Operation

Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the "Cleaning and maintenance"
chapter on page 10).
Food may only be stored in its original packaging or in suitable
containers.
6.1

Energy saving tips

Choose a well ventilated installation location which is protected against
direct sunlight.
Allow food to cool down first before placing it in the device.
Do not open the cooling device more often than necessary.
Do not leave the lid or door open for longer than necessary.
6.2

Using the cooler

➤ Place the cooler on a firm base.
As is the case with every fridge, your cool box must be well venti-
lated so that the heat which is withdrawn may also be carried off,
otherwise it is not possible for the equipment to function properly.
➤ Connect the 12 V connection cable (see fig. 3, page 3, item 1) to the
cigarette lighter or a 12 V socket in your vehicle or ...
➤ Connect the 220-240 V connection cable
(see fig. 3, page 3, item 2) to the 220-240 V AC mains supply.
Close the cooler by pushing down the lid and turning the handle
forward.
✓ After a certain period of time, the temperature inside the container will
cool down by up to max. approx. 20 °C.
Ensure that the objects placed in the cooler are suitable for
cooling/warming to the selected temperature.
➤ If you wish to switch off the device, pull out the connecting cable.
Operation
9