Publicidad
Idiomas disponibles
Idiomas disponibles
Depth
control rod
Chuck
Adjusting
auxiliary handle
knob
Auxiliary
handle
adjudting auxiliary handle knob
1. Turn the adjusting auxiliary handle knob unclockwise to release it.
The opening of the mount will passes freely over the chuck.
2. Insert the hammer drill head through the auxiliary handle mount.
3. Insert the depth control rod into
the mount small orifice, pushing the
adjusting auxiliary handle knob.
4. Rotate the auxiliary handle
together with its mount until is set in
the right position to operate the tool.
5. Turn the adjusting auxiliary handle
knob clockwise to firmly set
the mount onto the
hammer drill head.
Depth
control rod
6
ENGLISH
Adjusting
Impact-Rotation
selector
button
Rotation
selector
lever
Chuck
wrench
Assembly
Steps
Mount
Adjusting
auxiliary handle
3
knob
Auxiliary
handle
Parts
Speed
control
Switch
Chuck key
holder
1 & 2
Adjusting
button
Handle
Continuous
operation button
Power cord
protector
4
5
Power
feed cable
Publicidad
