Manuales relacionados para Truper 19319
Resumen de contenidos para Truper 19319
- Página 1 Manual Rotary Hammer Joules Impact Energy Motor ROEL-30N Applies for: Code Model 19319 ROEL-30N Read this manual thoroughly CAUTION before using the tool.
- Página 2 Contents CAUTION Technical Data Power Requirements To gain the best performance of the tool, prolong the duty life, General Power Tools Safety Warnings make the Warranty valid if necessary, and to avoid hazards Safety warnings for Drills of fatal injuries please read and and Hammer Drills understand this Manual before using the tool.
- Página 3 Technical Data ROEL-30N Code 19319 Description Rotary Hammer Chuck SDS Plus (Quick insertion system) Voltage 127 V~ Frequency 60 Hz Current Power 1.13 hp Impact Energy 3 Joules Drilling Capacity Concrete: 1” Metal: 1/2” Wood: 1-9/16” Speed 0 RPM - 1 100 RPM...
- Página 4 General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 Safety warnings for Drills and Hammer Drills Choose the right bit While operating the hammer drill CAUTION • Choose the right bit for the work piece. • Use the auxiliary handles, if supplied with the tool. It reduces the risk of severe injury and makes the job easier. Loss of control may result in personal injury.
- Página 6 Parts Depth Control Rod Non-Slip Handle Chuck Continuous Use Function 360° Button Variable Selector Block Auxiliary Reversible speed Button Handle mode control Function Energy lever Selector LED indicator Dust Switch Guard Cord Protector Chuck Carbon brushes wear indicator 1/2" Standard chuck Power Cord with SDS adapter Preparation...
- Página 7 Preparation Bit and Accessory Installation or Removal • Clean and lubricate lightly the bit and / or accessory before installing. • Insert the shaft of the bit into the SDS socket. • Twist and push the bit in until it engages. •...
- Página 8 Start Up Rotation Direction Rotation Direction Selector in the Drilling Position To make the bit turn forward and start drilling move the selector to the rotation direction (D) up to the arrow pointing the chuck. To make it turn in reverse and use the drill as screwdriver move the rotation direction lever towards the arrow pointing the hammer drill handle.
- Página 9 Start Up Operation Percussion drill. • Set the knob that changes the drive mode to the symbol • Position the bit at the desired location in the hole, then actuate the switch. • Do not force the tool. With less pressure, you get better results. Keep the tool in the proper position and prevent it from slipping out of the hole.
- Página 10 Maintenance Cleaning and Care Lubrication • To guarantee adequate motor cooling, always keep slots • We recommend lubricating the tool transmission every clean and free of obstructions. carbon brush change in a Authorized • Regularly inspect all the assembly screws. Double-check Service Center.
- Página 11 Authorized Service Centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Service Center.
- Página 12 Truper will not require any proof of purchase to make the warranty effective. Phone number 800-018-7873. Made in China. Imported by Truper, S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257, Phone number 761 782 9100.