Publicidad
Idiomas disponibles
Idiomas disponibles
The taste of the
sparkling water is
too high.
The taste of the
sparkling water
did not change
after you changed
the sparkling
concentration
level.
After you replaced
the Sodastream
Carbonator, no
sparkling water is
being produced.
The sparkling
water suddenly
stops being
dispensed even
though the
operation is still in
progress.
The Sparkling
function is turned
off but sparkling
water continues to
be dispensed.
DA68-03013A-13.indb 53
DA68-03013A-13.indb 53
All manuals and user guides at all-guides.com
• Decrease the Sparkling Level of the sparkling water.
(Sparkling Levels - 1: Low, 2: Medium, 3: High)
• Empty the sparkling water tank, and then set the Sparkling Level lower.
When the refrigerator makes sparkling water, it will make water at a lower
level of carbonation.
✽ To empty the sparkling water tank, press and hold the "Sparkling
Maker" button for 3 seconds to turn the Sparkling water maker off.
Dispense all the remaining sparkling water. After emptying the sparkling
water, press and hold the "Sparkling Maker" button for 3 seconds to
activate the sparkling water maker.
✽ Did you make sparkling water by pressing the "Quick Sparkling/Fill up"
button and holding for 3 seconds? If there was still sparkling water in
the tank before you started the Quick Fill function, sparkling water with
a higher CO ² concentration than the level you set can be produced.
Once the sparkling water tank is emptied, the refrigerator will make
sparkling water at the Sparkling Level you have set.
• If you change the concentration level, the new level is applied to the
subsequent production. That is, the change does not affect the sparkling
water in the sparkling water tank nor does it affect the sparkling water
production currently in progress. The change is only applied to subsequent
productions.
• After replacing the SodaStream Carbonator, be sure to touch and hold the
"Quick Sparkling/Fill up" button for 3 seconds to reset the SodaStream
Carbonator.
• Check if the short lines inside the cup icon are turning on one by one
in a clockwise direction. This indicates that the sparkling water is being
produced. When production is complete, all of the short lines inside
the cup icon turn on. When production is complete, the refrigerator will
dispense sparkling water.
• If the refrigerator is not dispensing sparkling water, check if "OFF" is
displayed above the cup icon over the Sparkling Maker button.
• This indicates that the sparkling water tank is empty and the automatic
sparkling water production function is turned off. To produce sparkling
water, touch and hold the "Sparkling Maker" button for 3 seconds to start
production.
• Even if you turn off the sparkling water production function, sparkling
water is dispensed for as long as there is sparkling water in the sparkling
water tank.
• If you do not use the sparkling water maker for an extended period of
time, stop the automatic sparkling water production function and remove
the sparkling water through the dispenser.
English - 53
2015. 8. 26.
2015. 8. 26.
10:30
10:30
Publicidad
