EGO LM2130 Manual Del Operador página 24

INSTALLING THE BLADE
NOTICE:
To re-install or replace the
blade(s), be sure to replace the parts
in the exact order in which they were
removed, especially ensuring that the
words "THIS SIDE FACING DECK" on
upper blade is facing the mower deck
and "THIS SIDE FACING GRASS" on
lower blade is facing you.
1. Wear protective gloves.
2. Insert the two saved "Blade Set"
bolts that removed during blade
removing into the sharpened or
new upper blade from the side that
stating" THIS SIDE FACING DECK"
and then mount the upper blade
onto the motor shaft (Fig. 7).
NOTICE: The diamond protrusion on the
"Blade Set" bolts should be aligned with
the rhombic hole in the upper blade
(Fig. 8).
3. Depending on the cut desired,
mount the lower blade chosen onto
the motor shaft. Fig. 9 is illustrating
EGO High-Lift Bagging Lower Blade
mounting.
24
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC/LM2150SP/LM2150SP-FC
7
"Blade
Set" Bolts
Upper Blade
8
Diamond
Protrusion on
"Blade Set" Bolts
9
EGO High-Lift Bagging Lower Blade
Fan
Rhombic Hole in
Upper Blade
Upper Blade