Publicidad
Idiomas disponibles
Idiomas disponibles
Fig. 4
90°
Installing Tuckpointing Guard
(Fig. 5, Fig. 6)
To Attach Guard
1. Unplug tool from power source.
2. Position the Guard 13 on the spindle neck
so that the Arrow on the Guard 25 and the
Arrow on the Spindle Neck 26 align.
3. Slide the Guard 13 on the spindle neck,
and rotate the Guard 13 until the Stabil-
ity Bracket and the hole for the auxiliary
handle are aligned.
4. Screw in the auxiliary handle to secure the
Guard 13 on the tool.
5. Always position Wheel Guard 13 between
operator and work piece and direct sparks
away from operator.
To Remove Wheel Guard
1. Unscrew the auxiliary handle.
2. Rotate the Guard 13 until the Arrow on the
Guard 25 and the Arrow on the Spindle
Neck 26 are aligned.
3. Remove the Guard 13 from the spindle
neck.
Reverting to Grinding Applications
(Fig. 2)
Return the Gear Housing 21 to original position
and replace Type 27 grinding guard. See manu-
al for grinder for details.
TG503 Tuck Point Grinder Guard OSI Final 20230606.indd 14
TG503 Tuck Point Grinder Guard OSI Final 20230606.indd 14
Assembly
Fig. 5
13
25
27
(under
tool)
90°
Fig. 6
-14-
26
2
27
6/6/2023 1:43:02 PM
6/6/2023 1:43:02 PM
Publicidad
