Publicidad
Idiomas disponibles
Idiomas disponibles
Always apply heat to the frozen spot from
the outside and work inwards.
Ensure the gun does not ignite any materials
around the pipe and remember that metal
pipes conduct heat.
Plastic pipes and sleeves must be heated
with particular care to avoid damage.
Cleaning and maintenance
Clean the tool with a slightly damp cloth
after use and always keep all surfaces and
ventilation slots (2) clean.
Never use corrosive or abrasive detergents,
as they may aff ect plastic parts.
Service centre
Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
•
Complaints
•
Replacements parts
•
Returns
•
Guarantee issues
•
www.schou.com
Environmental information
Electrical and electronic equipment
(EEE) contains materials,
components and substances that
may be hazardous and harmful to
human health and the environment
if waste electrical and electronic equipment
(WEEE) is not disposed of correctly. Products
marked with a crossed-out wheeled bin are
electrical and electronic equipment. The
crossed-out wheeled bin indicates that waste
electrical and electronic equipment must
not be disposed of with unsorted household
waste, but must be collected separately.
Manufactured in P.R.C.
Manufacturer:
Schou Company A/S
Nordager 31
DK-6000 Kolding
All rights reserved. The content of this manual may not
be reproduced, either in full or in part, in any way by
electronic or mechanical means, e.g. photocopying or
publication, translated or saved in an information storage
and retrieval system without written permission from
Schou Company A/S.
GB
21
Publicidad
