Create THERA MATT PRO Manual Del Usuario página 17

• Manual descaling mode:
After the unit has been working for 500 cycles, it will enter descaling alarming. Cappuccino
and latte indicator blink in turn. If you don't descale in time, waterway system may block.
Note: If you want to descale before 500 cycles, you can descale manually as following steps:
1. Ensure the power switch is at the position of "O", and the power cord is unplugged. Fill 400
ml white vinegar and 600 ml water into the water tank. Assemble the milk tank into the
unit, turn frothing control knob clockwise to clean position.
2. Press the power switch to "I" position, cappuccino and latte indicators blink in turn. Press
Espresso button and Latte button at the same time, the unit will enter descaling mode
automatically. The 6 indicator lights blink by turning a circle clockwise, the frothed milk
dispensing tube will flow out hot water and steam. After 10 minutes, the unit will enter
standby mode and the 6 indicator lights will illuminate.
3. Discard the residual descaling solution, and clean the water tank, fill appropriate amount
of pure water, brew two cups of Espresso continuously and then brew two cups of Latte
continuously. The cleaning will be finished and the 6 indicator lights will illuminate. The
unit will recover to the standby mode and after the unit has been working for 500 cycles
again, the unit will remind descaling again.
Note: Under descaling reminding status, you still can operate the unit normally, and after
operation, it will return to descaling reminding status.
E NGLI SH
17