CASUALPLAY clip-up Instrucciones página 10

Fitting & operation information:
Please refer to the instruction diagrams (P.21 - 27)
Travel highchair 1-Preparation:
Clamp
2-This product can only be attached to table between 20 mm to 70 mm thick.
3-Mounting:
4-Securing:
Harness 5-Opening:
6-Closing:
7-Adjusting the strap length:
8-Harness tension:
Travel highchair 9-Using the rear pocket:
10-Folding:
11- Using the carrying bag:
Seat cover
12-Disconnect the clamps on both sides.
13-Remove the seat board.
14-Remove the seat bar.
15-Insert the seat bar.
16-Insert the seat board.
1 7 & 1 - 8
19 & 20-Connect the right clamp.
Fitting:
This product is not suitable for use with all tables. Do not use with glass-topped
tables, tables with loose table tops, table leaves, single pedestal tables, card
tables, camping tables or any othe table that does not offer sufficiently stable
support.
Removal is a reversal of this procedure.
Slide the strap adjustor to suitable length (a, b & c).
Always make sure that the harness is correctly tensioned to ensure maximum
protection for your child.
You shoulf only be able to insert 2 fingers between the shoulder strap and waist
strap.
NOTE: Winter/ Summer clothing can make a difference to the size of your child.
Removing the seat cover for cleaning:
Refitting the seat cover:
Connect the left clamp.
8