cecotec TV 0 0024 Serie Manual De Instrucciones página 34

ENGLISH
1. BEFORE USE
This appliance is packaged in a way as to protect it during transport. Take the appliance
-
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content:
- TV
- Remote control
AA cells (x2)
-
- Instruction manual
Note:
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. INSTALLATION
Assembling the stand
To fix the TV to the wall:
Fig. 1
1. First, please put the TV on the table, and put a soft cloth on the table to avoid scratches
on the display.
Use the screwdriver to remove the screws that are attached to the bottom bracket (as
2.
shown in figure 1); then remove the bottom bracket (remove screws and bottom bracket
carefully).
3. Choose a bracket that can be fixed to the wall according to the measurements of the TV
as shown in figures 2 and 3.
4. Drill four holes in the wall and put four screws.
5. Use the screwdriver to fix the screw on the back of the TV. Next, hang the TV on the wall.
T V 0 S ERIES 0 0 24/TV 0 SERIE S 0 032
66
Legend Fig.1:
1. Wall-mounted
2. Support
Wall-mounted
3.
4. Wall screw
Note:
Thee Mounting flange (VESA) is not included.
1.
2. When mounting the TV, be sure to keep it at a safe distance from other appliances.
3. If necessary, contact a competent technician to avoid danger.
4. The figure is for reference only.
Follow the instructions in the manual to securely secure the TV to the stand.
5.
6. Follow the VESA standard for proper mounting of the TV to the bracket.
Installation and connection of the TV
TV Configuration. Fig. 3
- Place the TV on a stable place that can support its weight.
- To avoid danger, keep the TV away from water or heat sources (such as a light, candle, or
heating appliance), and ensure adequate ventilation at the back of the TV.
Connect the antenna and power.
1. Connect the antenna cable to the antenna socket on the back of the TV.
2. To plug in the TV's power cable:
Turn on the TV:
3. Press the power button on the TV: the indicator light will turn green. If the TV is in standby
mode (red indicator light), press the power button on the remote to turn on the TV.
Fig. 3 key:
1. TV signal output
Note: The figure is for reference only.
Bracket installation
1. Take the TV, accessories, and base out of the box (some models do not include a base).
Fig. 4
To avoid damaging the TV, place it on a cloth or soft material supported on the table and
2.
screw the neck of the base to the TV.
3. Properly secure the base to the TV to complete the installation.
Tip:
To ease the base installation and avoid damage, we advise you to use a PH2 type screwdriver.
TV 0 SERIES 0024/TV 0 S ERIES 0032
ENGLISH
67