FeiYu Tech Pocket 3 Guia De Inicio Rapido página 4

2. Start to use
2.1 Charging
Connect USB-C cable with charging port to charge Feiyu Pocket 3.
We recommend that you charge your camera at least once a
month.
Charging
Status
Charging
Complete
Indicator
2.2 Insert microSD card
An UHS - Ⅰ Speed Grade 3 (U3) rating
microSD card (equipped by user) is
required.
Please format the microSD card with
Feiyu Pocket 3 when insert it at the
first time.
2.3 Mount the expansion base
Slide the magnetic base (the bottom
part of Feiyu Pocket 3) into the
expansion base as shown in the figure.
Use the expansion base to install tripod,
wristband, etc.
2.4 Usage for protective cover
When not in use, please cover the gimbal
with the protective cover.
Hold the two sides of protective cover
(which have an opening) firmly, and
push it down to cover the camera (As
the picture shown at right). Reveal the
charging port through the opening
which is larger.
Pull the protective cover up in the same way in opposite
direction to take it down.
While Working
(Screen status)
Display
Disappear
- 4 -
While OFF
(Indicator status)
Red light is on
Light is off
5V 2A