Uline H-5054 Instrucciones De Montaje página 2

3. Place tabletop (3)
upside down on a
smooth, non-marring
surface. Insert six
camlocks (B) into
corresponding holes
on modesty panel (1)
and legs (2). Insert
six camlock pins (A)
and five dowels (C).
With two people, place
the assembled base
on the tabletop (3).
Turn each camlock (B)
clockwise until it locks.
Cover each camlock
(B) with a deep
camlock cap
(G). (See Figure 2)
4. Attach an L-Bracket (E) to each side of each leg
(2) and secure to the tabletop (3) using six #4 5/8"
screws (F) per bracket. Tighten screws with Phillips
screwdriver. (See Figure 3)
5. Attach an L-Bracket (E) to modesty panel (1) and
secure to the tabletop (3) using six #4 5/8" screws (F).
Tighten screws with Phillips screwdriver. (See Figure 3)
NOTE: Ensure at least one L-Bracket connects
modesty panel (1) to the tabletop (3) and at
least one L-Bracket connects each leg (2) to
the tabletop (3).
NOTE: L-Bracket holes can be started with drill
(optional).
Figure 3
1
2
PAGE 2 OF 6
ASSEMBLY CONTINUED
Figure 2
B
2
G
3
C
A
1
2
3
F
3
E
2
1
3
6. Mount floor glides (D) on legs (2). Floor glides (D) can
be adjusted to compensate for uneven floors.
(See Figure 4)
2
7. With two people, turn table over and set it upright.
(See Figure 5)
Figure 5
1-800-295-5510
uline.com
Figure 4
D
2
2
1
2
3
0423 IH-5054