Publicidad
Idiomas disponibles
Idiomas disponibles
Ambient temperatures at
point of operation
-16°C to 0°C (23.2°F - 32°F)
1°C to 26°C (33.8°F - 78.8°F)
Above 27°C (80.6°F)
DAILY MAINTENANCE
Be sure all nuts and bolts are tight. Check for any unusual noise or vibration
After use: open the air tank drain cock to drain condensation from tank
MONTHLY MAINTENANCE
Inspect air system for leaks by applying soapy water to all joints. Tighten those joints if leakage is observed.
Clean the air lter.
CAUTION: All air line components (including hoses, pipe, connectors, lters, & regulators, etc.) Must be
rated for a minimum working pressure of 125 psi / 860 KPa / 8.6 bar or 150% of the maximum system
pressure, whichever is greater. Disconnect any tools from the air supply before performing maintenance,
clearing a jammed fastener, leaving the work area, moving the tool to another location, or handing it to
another person. When cleaning air lter, of any parts in direct contact with the air production, do not use
any ammable or toxic cleaner or solvent.
COLD WEATHER CONDITIONS:
SAE viscosity
SAE 10 W
SAE 20 W
SAE 30 W
1 YEAR
L I M I T E D WA R R A N T Y
ISO viscosity
ISO 32
ISO 68
ISO100
7
Publicidad
