Original Prusa XL Manual Del Usuario página 31

PASO 26 Version C: mounting the xLCD
Carefully turn the printer so that the front side is facing you.
From the front of the printer, place the LCD assembly close to the lower front
aluminum extrusion where are the LCD cables.
Connect the xLCD cable to the slot on the xLCD board.
There is a latch on the xLCD cable connector, which must be facing the triangle
symbol on the board. See the detail.
Connect the earthing cable and connect it to the PE connector on the xLCD.
Push the earthing connector fully into the PE faston.
PASO 27 Montando el LCD
Alinea el conjunto LCD con las tuercas de la extrusión de aluminio frontal.
Inserta y aprieta el tornillo M3x16 del lado izquierdo de la pantalla LCD.
Inserta y aprieta el tornillo M3x16 del lado derecho de la pantalla LCD.
3. Instalación de la impresora
Original Prusa XL Cabezal Único (Ensamblada) 31