Publicidad
SETTING UP 2.4GHz SLIPSTREAM WIRELESS
Hyper-fast sub-1ms wireless connection is designed for no-compromise gaming
grade performance.
> Toggle power / wireless mode switch (S) to "2.4GHz" position to turn on your mouse.
> Connect the USB wireless receiver (V) to an available USB 2.0 or 3.x port located on the front
panel of your PC or nearby USB port.
(e.g. on CORSAIR MM700, MM800, MM1000 mousepads).
> The battery & wireless LED indicator (C) will turn solid white when connected.
> Download the iCUE software from www.corsair.com/downloads.
> Run the installer program and follow instructions for installation.
If reconnection is required, initiate USB wireless receiver pairing via the iCUE software settings menu.
SETTING UP BLUETOOTH
Bluetooth wireless is best for everyday computing tasks, productivity, and office applications.
> Initiate Bluetooth pairing on your Bluetooth 4.0 or higher enabled device.
> Press and hold DPI UP button.
> Toggle power / wireless mode switch (S) to "BT" position to turn on your mouse.
> Follow the instructions to successfully connect your device.
> The battery & wireless LED indicator (C) will turn solid blue when connected.
ON-THE-FLY DPI TUNING
The mouse has a unique feature where you can adjust the current onboard DPI stage setting in 50 DPI increments
without the software, so you can jump right into the action while you find the perfect sensitivity setting.
FUNCTION
Increase DPI by 50
Decrease DPI by 50
Reset DPI Stage
On-the-fly DPI changes are saved to the onboard memory and can be further adjusted in granular 1 DPI steps in
iCUE software. If iCUE is running, then changes are saved to the software profile directly.
ENGLISH
WIRELESS
®
SHORTCUT
Hold DPI up button (H) and press
forward button (L)
Hold DPI up button (H) and press
back button (M)
Hold DPI up (H) then both forward (L)
and back (M) buttons for 2 seconds
2
MULTI-PURPOSE LED INDICATOR
Blinks green
Blinks red
Blinks yellow
Publicidad
