Fitwood TAIMI WALL BARS Manual Del Propietário página 5

Assembly instructions
EN
Always tighten the screws slowly. The material is wood and may crack as a result of excessive
force. After all the screws are in place, check that they are correctly tightened.
- Assemble the wall bars on a soft surface, such as cardboard or carpet.
- Prepare all the parts in advance and make sure you have all the parts you need.
Step 1
Cover the floor to prevent the wall bars and floor
from scratching. Lay the first frame piece of the
wall bars on the floor and press the rungs into
their slots.
If necessary, use a rubber mallet and a wooden
block to insert the rungs into the frame piece, and
gently hit the end of the rung with a rubber mallet.
The rungs have been fitted tight intentionally.
Step 2
Place the second frame piece on top of the rungs
and carefully align the rungs one by one into
their slots starting at one end. If necessary, use a
rubber mallet and a wooden block to fully insert
the rungs to the frame piece. Be careful not to
damage the surface of the frame piece. Attach
four of the rungs with 80 mm screws.
Turn the wall bars over and screw the four rungs
onto the other frame piece as well.
Step 3
Turn the wall bars over so that the front side is
facing the floor. Screw the support beams in
place with eight (8 pcs) 60 mm screws. Make sure
that the FitWood logo is facing the floor when
attaching the support beams, so that it will be on
the front side of the assembled wall bars.
Step 4
Use the round cover stickers that come with the
product package to cover the screws on the sides
of the frame pieces after tightening them one
more time.
8
Step 5
Make sure you have the right fastening supplies for
the wall material you have chosen.
Lift the wall bars to the marked spot and make
sure that the pilot holes drilled in the support
beams are positioned correctly on the wall. Fasten
the screws through the support beams to the wall.
Safety and maintenance instructions
- Weight limit: 150 kg.
- The product is designed for indoor use only. Avoid contact with water as it can damage
the wood.
Inspect the product regularly and tighten screws as needed. Ensure the product is not damaged and
that its use is still safe. If you suspect that the product is unsafe, please contact the seller.
Clean the product with a soft dry cloth. Avoid the use of chemicals and cleaners.
Warranty
The product complies with FitWood's general warranty conditions:
TWO (2) YEARS for private home use.
ONE (1) YEAR for semi commercial and/or commercial use.
Modifications to the product and installation of accessories must always be carried out in accordance
with the manufacturer's instructions. Warranty does not cover damages caused by modifications
made to the product without the manufacturer's consent or the use of incorrectly installed
accessories or accessories provided by other manufacturers.
We do our best to provide spare parts for the wall bars even after the warranty period has expired. In
case you need spare parts please contact us: Info@fitwood.com.
We are happy to receive your feedback and answer any questions you may have. We sincerely wish
that you will enjoy your new FitWood TAIMI wall bars.
EN
9