Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Before using the device, you must charge it using the USB C charging cable. The charging
indicator (9) is solid red while charging. It turns off once the device is fully charged.
1.
Press the power button (3) for around 3 seconds to turn on the speaker. A beep will
indicate that the speaker is on.
2.
The speaker will enter Bluetooth pairing mode. Search PARTYBTIPMS2, and click to
connect it. A beep will indicate that connection is established.
3.
Short-press button (2) to play/pause music in BT/micro-SD play mode. To receive a call,
briefly press the PLAY/PAUSE button (2) to answer the call, press and hold the button to
reject the call. When the speaker is wirelessly connected to your phone, press the PLAY/
PAUSE button (2) twice to redial the last number dialled.
4.
Long-press the + button (5) to increase the sound volume, short-press the same button
to skip to the next track in BT/micro-SD card mode. Press the + button twice to activate
or deactivate pairing mode.
5.
Long-press the - button (1) to reduce the sound volume, short-press the same button to
return to the previous track in BT/micro-SD card mode.
6.
Short-press the power button (3) to change the play mode.
7.
Long-press button (4) to turn the party lights on/off. Short-press to change the lighting
colour. 8 lighting modes in total.
8.
Insert the micro-SD card into the port (10) to play music from the micro-SD card (maximum
memory capacity allowed 32 GB).
9.
Connect your playback device to the speaker using a 3.5mm audio cable and the speaker
will play the music from your device.
10. Press the power button (3) for about 3 seconds to switch off the speaker. A beep will
indicate that the speaker is off.
Operation in pairing mode
NB: You need 2 identical speakers for this mode.
1.
Turn on both speakers (if they're connected to other devices, disconnect them first)
2.
Press the + button (5) twice on one of the speakers to enter pairing mode. An audible
signal indicates that pairing is complete. You can now connect your phone remotely.
3.
In pairing mode, press the + button (5) twice to deactivate pairing mode.
- EN 13 -
Publicidad
