Beeper Trail Guia De Inicio Rapido página 8

ASSEMBLY
1
1. To begin assembling your scooter,
straighten the mast and lock it using the
folding system.
5
5. Position the display tab on the front of the
bracket. Match the two upper screw holes in
the bracket to the two holes in the display
bracket.
8
2
2. The assemblies required are those of the
handlebar and the display
6
6. Tighten the 4 screws firmly using
the Allen key to secure the display and
the handlebar.
Find the complete technical manual on our website at the following address: https:/ /urlz.fr/jCsL or by flashing the QR code opposite
3
3. Unscrew the 4 screws of the
stem clamp using the n°5 Allen
key and remove the front part.
7
7. Connect the display using the only
connector available on the mast.
4
4. Install the handlebar
between the two parts of the
caliper.