Publicidad
Idiomas disponibles
Idiomas disponibles
Setting the Controls
BUILT-IN HUMIDITY CONTROL: An intuitive 'set and forget' humidistat is
built into the DR65A3000 to set the humidity level right on the device. Optional
external control wiring is also available. If an external dehumidistat is used, the
on-board dehumidification control should be set to 80% RH.
Control Options
The DR65A3000 may be used with one of the following external controls:
DR65A3000 Dehumidification System 33-00297EFS—15
T10 or T10+ Pro Smart Thermostat (T10 models begin with
THX321WF. T10+ kits begin with YTHM1004R)
• Controls heating/cooling and dehumidification.
• Advanced dehumidifier setting options to run system fan with
dehumidifier or lock out dehumidifier if cooling is running.
Prestige IAQ Thermostat Kit (kit numbers start with YTHX9421R)
• Controls heating/cooling, dehumidification, and ventilation.
• Wireless sensor for displaying outdoor temperature and humidity.
• Advanced dehumidifier setting options to run system fan with dehumidifier
or lock out dehumidifier if cooling is running.
• Maintenance and service reminders.
• High definition color display.
• RedLINK Wireless technology
VisionPRO Smart or VisionPRO RedLINK Thermostat
• WiFi (TH8321WF1001) or RedLINK Wireless technology (TH8321R1001)
• Controls heating/cooling and dehumidification.
• Display outdoor temperature and humidity.
• Advanced dehumidifier setting options to run system fan with
dehumidifier or lock out dehumidifier if cooling is running.
HumidiPRO Digital Control (H6062A1000)
• Manual dehumidification control
• Dehumidifier compressor protection
• RH% and outdoor temperature calibration
• Adjustable high and low range stops (10-90%)
3
Publicidad
