Publicidad
Idiomas disponibles
Idiomas disponibles
PAW-150
V2.0
CONNECTOR A
100W Speaker (positive
1
Grey
speaker)
100W Speaker (negative
2
Grey
speaker)
GND- It connects to the negative
3
Black
side of the battery.
DC12V+ It connects to the
4
Red
negative side of the battery.
5
-
NC
DC12V+ Positive lights input.
6
Red
Connect to 12 VDC.
Light A: Positive light output
7
Yellow
DC 12V
Light C: Positive light output
8
Blue
DC 12V
Light B: Positive light output
9
Brown
DC 12 V
Light D: Positive light output
10
Green
DC 12 V
INPUT VOLTAGE
CURRENT
FUSE
LIGHTS CURRENT
LOAD IMPEDANCE
OUTPUT POWER
SIREN FREQUENCY
TEMPERATURE
DIMENSION
B&G Electronics guarantees that this product leaves the factory free from defects related to materials
and manufacturing. If for any reason a failure related to materials and manufacturing were to occur
during the warranty period after the date of purchase, B&G Electronics would repair or replace the
failing equipment at the factory.
This warranty does not cover damage caused by mishandling, improper operation, fungible
components, or improper installation. This warranty does not cover physical damage to the surface
of the product, or damage caused by use of the product in conjunction with other products or
accessories not designed by B&G Electronics.
Keep the purchase receipt for the entire duration of the warranty period.
1
2
3
4
5
6
7
8
TECHNICAL SPECIFICATIONS
B&G ELECTRONICS
ONE YEAR LIMITED WARRANTY
CONNECTOR B
The blue wire connects to the steering
wheel wire. (Cut the horn wire and connect
Blue
the blue wire)
The yellow wire connects to the claxon
speaker wire. (Cut the horn wire and
Yellow
connect the yellow wire)
NC
-
-
NC
-
NC
NC
-
RADIO. Positive radio input. Amplify
the volume with the PAW 100. (Auxiliary
White
function)
RADIO. Negative radio input. Amplify
the volume with the PAW100 (Auxiliary
White
function)
DC 12V (10V~14.5V)
6A
15A / 25A
10A X 4 wires
8 Ohm
150 W
400Hz ~1500Hz
-40ºC ~50ºC
L 15 x W: 14.7 x H:6 cm
4
Publicidad
