Descargar Imprimir esta página

GreenWorks 2540802 Manual Del Operador página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

Do not wash with a hose; avoid getting water in
motor and electrical connections.
Never remove or tamper with safety devices. Check
their proper operation regularly. Never do anything
to interfere with the intended function of a safety
device or to reduce the protection provided by a
safety device.
Keep mower free of grass, leaves, or other debris
build up. Allow mower to cool before storing.
Never make any adjustments or repairs with the
motor running.
Always remove battery pack from mowers before
adjusting, cleaning, or repairing.
Check grass catcher components and the discharge
guard frequently and replace with manufacturer's
recommended parts, when necessary.
Sharpen a dull blade equally at each end to
maintain the balance.
Keep guards in place and in working order. Mower
blades are sharp, and can cut. Wrap the blades or
wear gloves, and use extra caution when servicing.
Clean the blade thoroughly and check its balance by
supporting it horizontally on a thin nail through its
center hole. The nail should also be in a horizontal
position. If either end of the blade rotates downward,
remove some metal from the heavy or lower end
until the blade is balanced. It is balanced when
neither end drops.
Use identical replacement blades only.
Maintain lawn mower with care. Keep cutting edges
sharp and clean for best and safest performance.
Follow instructions for lubricating and changing
accessories. Inspect lawn mower cord periodically
and if damaged, have it repaired by an authorized
service facility.
If situations occur that are not covered in this
manual, use care and good judgment or contact
Customer Service for assistance.
Never operate the mower without proper guards,
plates, or other safety protective devices in place.
Before each use, examine the machine for
damaged, missing, or loose parts such as screws,
nuts, bolts and caps.
Tighten correctly all the fasteners and caps.
Clean the machine with a dry cloth. Do not use
water.
The recommended ambient temperature range:
Item
Mower storage temperature
range
Mower operation temperature
range
Battery charging temperature
range
English
Temperature
32°F (0°C) - 113°F
(45°C)
32°F (0°C) - 113°F
(45°C)
39°F (4°C) - 104°F
(40°C)
7
Item
Charger operation temperature
range
Battery storage temperature
range
Battery discharging temperature
range
3
SYMBOLS ON THE PRODUCT
Some of the following symbols may be used on this
mower. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to
operate the mower better and safer.
Symbol Name
V
Volt
A
Amperes
Hz
Hertz
W
Watt
min
Minutes
/min
Per Minute
Alternating
Current
Direct Current
No Load
n o
Speed
Safety Alert
Eye Protec-
tion
WARNING ---
Wet Condi-
tions
Read Opera-
tor's Manual
Maintain
Safety Devi-
ces
Temperature
39°F (4°C) - 104°F
(40°C)
32°F (0°C) - 113°F
(45°C)
32°F (0°C) - 113°F
(45°C)
Explanation
Voltage
Current
Frequency (cycles per sec-
ond)
Power
Time
Revolutions, strokes, surface
speed, orbits etc., per mi-
nute
Type of current
Type or a characteristic of
current
Rotational speed, at no load
Precautions that involve your
safety.
Always wear eye protection
with side shields marked
to comply with ANSI Z87.1
when operating this equip-
ment.
Do not expose the product to
rain or moist conditions.
To reduce the risk of injury,
user must read and under-
stand operator's manual be-
fore using this product.
Do not open or remove safe-
ty devices while the tool is
running.
EN

Publicidad

loading