Peg-Perego culla grande Instrucciones De Uso página 13

4 The magnets can be used to fasten the foot muff to the
hood, to protect the child even more against the elements.
Just lift the foot muff as shown.
5 The bassinet has a zip to provide extra ventilation.
6 BACKREST ADJUSTMENT: pull the handle outwards and
rotate it clockwise to raise the backrest or anticlockwise to
lower it.
7 ADJUSTING THE FOOTREST: If necessary, the area
supporting the child's legs can be raised:
Pull the strap on the side under the pram body (fig.a)
When the desired height has been reached, fasten it to the
bottom of the pram body (Fig b). Raised footrest (Fig. c).
8 To return to the flat position:
Unfasten the strap from under the pram body (fig.a),
press on the mattress (fig.b) until it returns fully to the flat
position (fig. c). The strap will withdraw automatically.
9 CARRY HANDLE: the handle bar is fitted with a carry
handle.
_ Before lifting the bassinet, ensure the built-in hood is
correctly fastened.
_ Before lifting the bassinet, make sure the hood is in the
correct position for transport.
_ Before unfastening and lifting the bassinet from the frame,
adjust the backrest to its lowest position.
10 To fasten the bassinet, position it on the frame and press
down with both hands until it clicks into place.
Always enable the brake on the frame before fastening and
unfastening the bassinet.
IMPORTANT: Ensure the bassinet is properly fastened.
11 To unfasten the bassinet, lift the two side levers on the
joints (fig_1) and release it from the frame (fig_2).
12 REMOVING THE HOOD: To remove the hood, unbutton the
6 buttons on the lower edge.
13 Press the buttons on the two attachments and remove the
hood.
14 Remove the two rigid supports.
15 Raise the backrest (fig_a). This makes it easier to remove
the mattress (fig_b).
16 Remove the inner lining by opening the two zips on the
edge of the Culla Grande.
17 Do the opposite to reposition the lining.
When fastening the hood, ensure you insert the rigid
supports correctly. Insert the tube bearing the carry handle
into the hood's front slot, ensuring the handle is centred
correctly.
18 Finally, slip the second metal support into the hood' s inner slot.
19 Fasten the hood to the appropriate supports and fasten
the 6 buttons.
Padding cleaning instructions
Brush the fabric parts to remove dust.
• When washing, closely follow the instructions stated on
the label sewn into the cover.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents and do not tumble dry.
Product cleaning
• This product requires a small amount of maintenance.
Cleaning and maintenance must only be carried out by adults.
• Keep all moving parts clean and if necessary lubricate
them with light oil.
• Clean the plastic parts periodically with a damp cloth. Do
not use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock absorbing device with
solvents or other similar products.
• Protect the product from atmospheric agents: humidity,
rain or snow. Extended exposure to sunshine can cause
colour changes in many materials.
• Store the product in a dry environment.
• Remember to regularly ventilate the interior of the carrycot.
Culla Grande car kit
• Culla Grande can be installed in your vehicle by purchasing
the Culla Grande Car Kit.
• Only the Culla Grande Car Kit should be used to fasten to
Culla Grande to your vehicle securely.
The Original Accessory PegPerego
PegPerego accessories are designed as a useful, practical
13