Garant GridLine 944520 Manual De Instrucciones página 25

5. Setting up
 Set up on a solid, level floor with maximum load-bearing capacity.
 Ambient temperature: -10 °C to +40 °C.
5.1. BATTERY CHARGING CABINET
 Use spirit level to check horizontal levelling. If necessary, adjust adjustable base [} Page 25]
or use shim wedges.
 Size 1000/DE and 1250/DE: Maintain a gap of at least four cm between cabinet rear and wall.
5.1.1. Adjusting adjustable base
A
NOTICE
Limited load-bearing capacity
Damage from overloading adjustable base.
» When using the adjustable base, note load-bearing capacity reduced to 500 kg.
» Before adjusting the adjustable base, completely clear out the cabinet.
» Do not screw the adjustable base's thread all the way in. Keep 0.5 cm of thread protruding.
ü Cabinet is completely empty.
1. Take lower storage shelf out of cabinet by lifting it at the holes on the sides.
CAUTION! Risk of cuts. Wear safety gloves.
2. Adjust four levelling feet inside the cabinet using a 5-mm Allen key.
3. Use a spirit level to check horizontal levelling.
4. Repeat procedure until cabinet is perfectly level.
5.1.2. Wall mounting
B
i
Applies to: Battery charging cabinet. Do not mount on wall by yourself.
CAUTION
Cabinet, roller cabinet or rack toppling
Risk of injury to hands, feet or body.
» It is essential the cabinet is secured against toppling.
» Wear safety shoes and safety gloves.
» Do not store workpieces unsecured.
» Do not open several drawers at once.
» Keep cabinet shell cover clear of objects during transport.
» Set down heavy objects slowly.
» Ensure during movement and transport that all drawers and cupboard doors are closed and
locked.
» Comply with the maximum load capacity.
www.hoffmann-group.com
en
25