Publicidad
HANDLE AND NUT MUST BE TIGHTENED AGAINST DRIVE SHAFT BEFORE OPERATING WINCH.
Wind line on winch reel by turning winch handle in clockwise direction with ratchet
lever in up position. The ratchet should produce a loud, sharp clicking
noise. Make sure that ratchet lever is in up position and holding
load before winch handle is released. To unwind
or reel out line, securely grip winch handle
and apply force in clockwise direction so
that ratchet lever can easily be moved
to down position. Carefully turn
handle in counterclockwise
direction. Do not lose control.
The winch can be converted to
wind line on to the underside
of the reel. To do this, carefully
examine ratchet assembly and remove it from winch. Do not lose small parts. Turn the lever over
and reassemble. Do not over tighten bolt. Check operation to insure the ratchet lever rotates fully
without binding.
Attach winch handle securely to primary drive shaft (upper or low speed shaft). Make sure that
handle clip engages with groove in drive shaft. Wind line on winch reel by
turning winch handle in counter clockwise direction with ratchet lever in
"down" position. The ratchet should produce a loud, sharp,
clicking noise. Make sure that ratchet lever is in "down"
position and holding load before winch handle is
released. To unwind or reel out line, securely
grip winch handle and apply force in
counterclockwise direction so that
ratchet lever can easily be moved to
"up" position. Carefully turn handle in
clockwise direction. Do not lose control.
If handle is attached to intermediate
(lower or high speed) shaft, operate as
described above, reversing clockwise
and counterclockwise. The winch can be converted to wind line on to the underside of the reel.
To do this, carefully examine ratchet assembly and remove it from winch. Do not lose small parts.
Turn the lever over and reassemble. Do not over tighten bolt. Check operation to insure the
ratchet lever rotates fully without binding.
OPERATING INSTRUCTIONS
DLx1500FC & DLx1900FC
Up
Ratchet Lever
OPERATING INSTRUCTIONS
DLx2600FC
Up
Ratchet
Lever
NOT FOR THE MOVEMENT OF HUMAN BEINGS
Down
Down
Winch Handle
To Unwind
To Wind
Winch Handle
To Wind
To Unwind
Publicidad
