Using your irrigator
Your Oral irrigator comes with a convenient wall
holder. It can be mounted easily using the attached
items (picture 1).
Before using for the first time, fill the water
container (i) and allow the water to run through
completely by holding the irrigator handle (h)
over a washbasin.
1. Attach one of the irrigator nozzles (a) to the
handle until it locks into place (picture 2). Fill
the water container with luke warm water.
2. Select the water pressure with the pressure
control dial (f) (1 = gentle, 5 = strong) (picture 4).
We recommend that you start with setting 1,
especially if your gums tend to bleed or if
children are using the Oral irrigator.
3. Turn on the irrigator by pressing the on/off switch
(e) (picture 3). (When doing so, the handle switch
should be in the lower position = water stop).
4. Lean over the sink and aim the irrigator nozzle
at your teeth and gums. Slide the switch (g) up
to activate the water delivery (figure 5). Keep
your mouth slightly open to allow the water to
fall into the sink.
Slide the handle switch up (g) for a continuous
water stream.
Slide the handle switch down and press into it, to
use the on-demand function (picture 6).
Caution: Please turn off the oral irrigator with the
on/off button when the water compartment is
empty. Operating the oral irrigator without water can
damage the device.
OxyJet nozzle
Nozzle functions:
You can choose between two different
nozzle functions by sliding the nozzle
switch (b) down or up. Before doing so,
turn off the water stream by sliding the
handle switch down:
Rotating stream for general cleaning and gum
massage (nozzle switch in lower position):
The rotation of the water stream and its micro
air-bubbles are designed for easy penetration into
the interdental space and gentle gum massage
(picture 8).
Focused stream type (nozzle switch in upper position):
The focused water stream with its micro-bubbles are
designed for targeted cleaning (picture 9).
4
WaterJet nozzle
Jet functions:
You can choose between different
stream types by click-in and click-out
the blue center of the nozzle. Before
doing so, turn off the water stream by
sliding the handle switch down:
When the blue center is out (default position) you
will get a high pressure single precision stream
(picture 10)
As soon as you click the blue center in, you will get
a multi-jet stream, designed for great reach and
massage effect of the gums and the gumline
(picture 11).
Maximal operation time: 15 minutes
Cooling off time: 2 hours
After use
Always empty the water container entirely. Keep the
Oral irrigator switched on until the water stops
running through the nozzle in order to prevent
accumulation of bacteria. As soon as no more water
flows out of the nozzle, switch the device off
(picture 3).
Press the nozzle release button (d) (picture 7) to
take off the nozzle from the Oral irrigator. Always
wipe the handle and the Oral Irrigator dry; place the
handle back onto its base and store the Oral
irrigator in the nozzle compartment (c).
Cleaning recommendation
After use, rinse the nozzle under running water.
Regularly clean the housing with a damp cloth.
The water container and the nozzle compartment
are removable and dishwasher-safe.
Subject to change without notice.
Environmental Notice
Product contains batteries and/or recyclable
electric waste. For environment protection
do not dispose in household waste, but for
recycling take to electric waste collection
points provided in your country.