Publicidad
THANK YOU VERY MUCH FOR SELECTING OUR PRODUCT.
THIS
INSTRUCTION
OPERATING METHOD TO ENSURE PROLONGED SERVICE
LIFE. PLEASE READ AND COMPLETELY UNDERSTAND THIS
MANUAL BEFORE OPERATING THE LIFT TABLE. ALWAYS
KEEP THIS MANUAL AT AN APPROPRIATE PLACE. IF THE
MANUAL OR WARNING DECAL IS MISSING, PLEASE CONTACT
WITH DEALER.
Note: This Manual has been prepared for skilled and competent
personal. It provides instructions for using the product correctly and
parts list. This Manual cannot replace the professional skills and
expertise of the user.
1.
.
◇ Read & thoroughly understand the Instruction Manual completely
before using. Follow all safety instructions strictly.
◇ It is necessary to check all safety devices before operation.
◇ Make sure that there are no obstacles in the working area.
◇ Do not put foot or hand in scissors mechanism or through frame.
◇ Screw the lifting eyes on the base frame before working on the lift
table.
◇ Do not overload the lift table. Load should be distributed on the
table according to relevant load distribution chart.
◇ Pay attention if local voltage and frequency is as same as the
input specification of the lift table.
◇ Use the lift table on flat and solid ground.
◇ All the electrical connection and disconnection operations must
be carried out by skilled and competent personal.
◇ While operation, it is forbidden to contact the moving parts of the
MANUAL
WARNING!
improperly, a person may be seriously
injured.
Therefore,
according to the following instruction
DESCRIBES
If operating the lift table
operate
CORRECT
properly
Publicidad
