Sagola Premium 30 Manual De Instrucciones página 36

ANOMALY
Air leakage from Between container
the paint tank and lid
Between air motor
support and the lid
From the safety valve
From the exhaust
valve for relieving
air from the tank
Fluid leakage At the paint outlet
Fluid passages
between the lid and
the outlet connections
NOTE: The symbol (*) means that before starting the procedure it is necessary to release pressure (see paragraph 9.1)
CAUSE CHECK POINT
Loose fixing bolts
tightness
Dirt on lid packings
and/or on the tank
brim
Damaged lid packing
Damaged agitator
packing
Unsuitable sealing
due to the foreign
matter and/or
damaged valve
The exhaust valve is
open or improper seal
of the valve
The two-way valve is
open or improper seal
of the two-way valve
Loose connections
ENGLISH
REMEDY
Tighten all fixing
bolts firmly and
uniformly. (*)
Clean. (*)
Replace. (*)
Replace. (*)
Clean with a jet of air,
replace if the problem
has not been solved.
(*)
Close the valve,
replace if leak
persists
Close using the
handle, replace
if leak persists
Apply some adhesi-
ve and reassemble
correctly. (*)