KRESS CyberTank KAC875E Manual De Instrucciones página 6

ORIGINAL INSTRUCTIONS
PRODUCT SAFETY
WARNING Read all safety warnings
and instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
WARNING – When using this product, basic
precautions should always be followed,
including the following:
a) Read all the instructions before using the
product.
b) To reduce the risk of injury, close
supervision is necessary when the
product is used near children.
c) Do not put fingers or hands into the
product.
d) Use of an attachment not recommended
or sold by CyberTank manufacturer may
result in a risk of fire, electric shock, or
injury to persons.
e) Do not use a battery pack or CyberTank
that is damaged or modified. Damaged
or modified batteries may exhibit
unpredictable behavior resulting in fire,
EN
explosion or risk of injury.
f) Do not operate the battery cabinet with
a damaged cord or connector, or a
damaged output cable.
g) Do not disassemble the battery cabinet,
take it to a qualified service person when
service or repair is required. Incorrect
reassembly may result in a risk of fire or
electric shock.
h) WARNING – RISK OF EXPLOSIVE
GASES. To reduce risk of battery
explosion, follow these instructions and
those published by battery manufacturer
and manufacturer of any equipment you
intend to use in vicinity of the battery.
Review cautionary marking on these
products;
i) Using insulated tools, insulated gloves,
personal protective equipment, and
clothing and other measures for safe
installation of the battery system;
j) Housing is required for protection against
ingress of moisture and debris;
k) Maintain good ventilation to prevent
excessive accumulation of hydrogen;
l) Protective components and devices
required in the end use installation such
6
as fuses, circuit breakers, wiring, and
other devices such as disconnect devices
in accordance with European standards;
m)Correctly connect the system and any
auxiliary equipment (such as independent
controllers, monitoring equipment,
etc.) according to the circuit diagrams
and instructions provided by the
manufacturer;
n) Do not touch battery electrolyte, which is
corrosive and harmful to eyes and skin.
In case of contact with electrolyte, seek
medical attention immediately
o) Carry out necessary commissioning tests
and inspections before putting the system
into service;
p) NEVER smoke or allow a spark or flame in
vicinity of CyberTank;
q) Be extra cautious to reduce risk of
dropping a metal tool onto battery. It
might spark or short-circuit battery or
other electrical part that may cause an
explosion.
r) When charging the CyberTank, work in
a well ventilated area and do not restrict
ventilation in any way.
s) Do not crush, disassemble the battery
packs. Do not expose the CyberTank to
fire or excessive temperature. Exposure to
fire or temperature above 100 °C (212 °F)
may cause an explosion.
t) Have servicing performed by a qualified
repair person using only identical
replacement parts. This will ensure that
the safety of the product is maintained.
GENERAL SAFETY WARNINGS
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE.
SAFETY WARNINGS FOR BATTERY
CABINET
WARNING – When using this product, basic
precautions should always be followed,
including the following:
a) To reduce the risk of injury, close
supervision is necessary when the
product is used near children.
b) Use of an attachment not recommended
or sold by Battery cabinet manufacturer