Installing The Batteries - Canon SPEEDLITE 600EX-RT Manual De Instrucciones

Installing the Batteries

Install four AA/LR6 batteries.
Recycling Time and Number of Flashes
Quick Flash
Approx. 0.1 to 3.3 sec.
Based on new AA/LR6 alkaline batteries and Canon's testing standards.
The Quick Flash function enables flash shooting before the flash is fully
charged (p.16).
Using AA/LR6 batteries other than the alkaline type may cause improper
battery contact due to the irregular shape of the battery contacts.
If you change the batteries after firing flashes continuously, be aware that
the batteries might be hot.
14
1
2
3
Recycling Time
Normal Flash
Approx. 0.1 to 5.5 sec.
Open the cover.
Slide the lock lever to the left as
shown in ", slide the cover down,
and open the battery compartment
cover.
Install the batteries.
Make sure the + and – battery
contacts are correctly oriented as
shown in the battery compartment.
The grooves on the side surfaces of
the battery compartment indicate –.
This is convenient when replacing the
batteries in a dark place.
Close the cover.
Close the battery compartment cover
and slide it up.
When it clicks in place, the battery
compartment cover is locked.
Number of Flashes
Approx. 100 to 700 flashes