Sd Cards And Usb Flash Drives; Precautions For Use; Sd Card Write Protection; Bluetooth - Tascam CD-400U Manual Del Usuario

SD cards and USB flash drives

This unit uses SD cards and USB flash drives for recording and
playback.
A list of SD cards and USB flash drives that have been confirmed
for use with this unit can be found on our web site. Please access
to a product page of this product from the TEAC Global Site
(http://teac-global.com) to find the list or contact the TASCAM
customer support service.

Precautions for use

SD cards and USB flash drives are delicate media.
In order to avoid damaging SD cards and USB flash drives, please
take the following precautions when handling them.
0 Do not leave them in extremely hot or cold places.
0 Do not leave them in extremely humid places.
0 Do not let them get wet.
0 Do not put things on top of them or twist them.
0 Do not hit them.
0 Do not remove or insert them during recording, playback,
data transmission or other access.
0 When transporting them, put them into cases, for example.

SD card write protection

This unit writes track information to the media in order to im-
prove operation performance. Since track information cannot be
written to SD cards that are write-protected, the amount of time
needed to read media will become longer, for example.
Bluetooth®
This unit has a built-in Bluetooth audio receiver, and can output
sound played on a computer or portable audio device that sup-
ports Bluetooth (Bluetooth device).
CAUTION
The Bluetooth function of this unit is not guaranteed to en-
able connection or operation with all Bluetooth devices.

Profiles

This unit supports the following Bluetooth profiles.
0 A2DP (Advanced Audio Distribution Profile)
0 AVRCP (Audio/Video Remote Control Profile)
In order to transfer audio by Bluetooth, the Bluetooth device
must support A2DP.
In order to control playback on the Bluetooth device, it must
support AVRCP.
Even if a Bluetooth device supports the same profiles, though,
its functions might differ according to its specifications.

Codecs

This unit supports the following codecs. It will automatically se-
lect one of them during audio transfer.
0 SBC
0 AAC
0 aptX
1 – Introduction
The unit will select the appropriate codec to use according to
the codec compatibility of the other Bluetooth device and com-
munication conditions.
NOTE
i You cannot select the codec to be used by pressing a button,
for example.
i Due to characteristics of Bluetooth wireless technology, play-
back from a Bluetooth device will be slightly delayed com-
pared to playback from this unit.

Content protection

This unit supports SCMS-T as a form of content protection when
transmitting audio, so it can play protected audio.

Transmission security

This unit supports security functions during Bluetooth transmis-
sion in accordance with the Bluetooth standard specifications,
but it does not guarantee the privacy of such transmissions.
TEAC CORPORATION will bear no responsibility should an infor-
mation leak occur during transmission by Bluetooth.

Using the TEAC Global Site

You can download updates for this unit from the TEAC Global
Site:
http://teac-global.com/
In the TASCAM Downloads section, select the desired language
to open the Downloads website page for that language.

About TASCAM customer support service

TASCAM products are supported and warrantied only in their
country/region of purchase.
To receive support after purchase, on the TASCAM Distributors
list page of the TEAC Global Site (http:// teac-global.com/),
search for the local company or representative for the region
where you purchased the product and contact that organiza-
tion.
When making inquiries, the address (URL) of the shop or web
shop where it was purchased and the purchase date are re-
quired. Moreover, the warranty card and proof of purchase
might also be necessary.

Product registration

Customers in the USA, please visit the following TASCAM web-
site to register your TASCAM product online.
http://tascam.com/
11
TASCAM CD-400U