Bluetooth Device Playback; Pairing; Usable Controls; Playback From A Bluetooth Device - Tascam CD-400U Manual Del Usuario

This unit can output sound from a computer, portable audio de-
vice or other equipment that supports Bluetooth (A2DP). More-
over, if the Bluetooth device supports AVRCP, the PLAY button
and other controls on this unit can be used to control playback
on the Bluetooth device.

Pairing

Follow the procedures below to enable communication with a
Bluetooth device.
NOTE
Pairing also requires operation of the Bluetooth device.
Refer to the operation manual of the Bluetooth device for
procedures.
1.
Select BLUETOOTH as the current source. (see "Selecting the
playback source" on page 22)
2.
Press and hold the main unit BACK [PAIRING] button or re-
mote control DISPLAY/RDS/INFO [PAIRING] button.
A PAIRING message will blink on the display.
BLUETOOTH
PAIRING
3.
Enable Bluetooth transmission on the other Bluetooth de-
vice.
4.
Select CD-400U (this unit) on the other Bluetooth device.
When pairing succeeds, this unit and that device will be
connected and Connected will appear on the Home Screen.
BLUETOOTH
Connected
NOTE
i Some older Bluetooth devices require the input of a passkey.
Enter 0000 in such cases.
i Pairing will automatically end if connection is not confirmed
within two minutes.
i When this unit is turned on, it will automatically try to con-
nect with the Bluetooth device to which it was previously
connected. At this time, pairing will automatically end after
five minutes if connection is not possible because that Blue-
tooth device is not turned on or its Bluetooth function is
turned off.
5 – Bluetooth device playback

Usable controls

Controls on the main unit and included wireless remote control
(RC-CD400) can be used to control the connected Bluetooth de-
vice if it supports AVRCP.
Main unit
PLAY button
PAUSE button
STOP button
MULTI JOG dial
turning
m / , [FAST]
buttons
CAUTION
Operation might not occur properly depending on the con-
nected Bluetooth device.

Playback from a Bluetooth device.

After pairing with the other Bluetooth device in advance, follow
the procedures below for playback from it.
1.
2.
Controls on the main unit and included wireless remote control
(RC-CD400) can be used to control the connected Bluetooth
device, and this unit can output the playback sound from the
Bluetooth device.

Unpairing

The Bluetooth device that is currently connected can be un-
paired from the unit.
1.
2.
3.
4.
Remote control
7 button
9 button
8 button
. / / [ l / ; ]
buttons
m / , buttons
Select BLUETOOTH as the current source. (see "Selecting the
playback source" on page 22)
Connect to CD-400U (this unit) on the other Bluetooth de-
vice.
Connected appears on the Home Screen when connection
completes.
Select BLUETOOTH as the current source. (see "Selecting the
playback source" on page 22)
Press the main unit BACK [PAIRING] button or remote con-
trol DISPLAY/RDS/INFO [PAIRING] button.
A Disconnect? message will appear on the display.
BLUETOOTH
Disconnect?
Press the main unit MULTI JOG dial or remote control EN-
TER button to unpair the device.
Press the main unit BACK [PAIRING] button or remote con-
trol CLEAR button to cancel unpairing.
After unpairing, the pairing operation will start.
TASCAM CD-400U
Function
Play
Pause
Stop
Selects tracks
Search backward
and forward
31