Stardom DR5 Serie Manual De Usuario página 6

Step 5 Mount your hard drives onto the removable drive tray and secure it with the screws included in the
accessory kit to avoid any damage to the hard drive due to accidental movements.
Step 6 When the hard drive installation has been completed, insert the hard drive tray into the system
horizontally and secure the latch into place.
Step 7 Connect the AC power cable to the DR5-SB3, and then plug the AC power to the wall socket.
Boot-up the unit.
Step 8 Set the storage mode using the LCD and buttons on the front (please refer to section 5 for front
panel and LCD information).
Step 9 Connect the cable to the PC and the DR5-SB3 port.
Step10 After booting up, your operating system will automatically recognize the RAID storage setup. After
RAID has been successfully recognized, please format your disks as instructed by your operating
system to suit your own storage needs. After formatting is complete, you may begin to use your
DR5 system.
5. Description of Front Panel Operation and LCD Information
Level 0
Quick Setup
Disk Manager
EXTERNAL 5 BAY
RAID Manager
HARDWARE RAID
System Manager
Level 1 Level 2
Create One RAID
Delete All RAID
Identify Disk
Show Disk Info
Identify RAID
Create RAID
Delete RAID
RAID Info
Change RAID Pwd
Rebuilding Priority
Standby Timer
System Info
Change Password
Logout From Menu
Alarm Control
Hardware Monitor
Level 3
RAID 0 / Clone / Large / RAID 1 / RAID 5 / RAID 3 / RAID 10
Disk 1
Disk 2
Disk 3
Disk 4
Disk 5
< Disk Info >
Select RAID
RAID 0 / Clone / Large / RAID 1 / RAID 5 / RAID 3 / RAID 10
Select RAID
< Password > for RAID setup
Highest/High/Medium/Low/Lowest
< 99999min >
Firmware Version
< Password > for System Info
< Y or N >
Mute the Buzzer
Voltage Monitor
Temp. Monitor
FAN Monitor
! 6
DECK DR5 User Manual
Level 4
Check Disk LED
Check Disk LED
Check Disk LED
Check Disk LED
Check Disk LED
< 3.3V / 5V / 12V >
< Temp. >
<Fan Speed/Fan Level>