Descargar Imprimir esta página

LG LRFNS2200 Serie Manual De Usuario página 42

Ocultar thumbs Ver también para LRFNS2200 Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

41
TROUBLESHOOTING
Problem
Icemaker is not
Refrigerator was recently
making enough
installed or icemaker
ice (continued).
recently connected.
(Ice Maker
installed only).
The ice detecting sensor is
obstructed.
The refrigerator is not
connected to a water
valve is not turned on.
sensor) obstructed.
Reverse osmosis water
connected to your cold
water supply.
Ice has bad
Water supply contains
taste or odor.
minerals such as sulfur.
(Ice Maker
installed only).
Icemaker was recently
installed.
The food has not been
stored properly in either
compartment.
The interior of the
refrigerator needs to be
cleaned.
The ice storage bin needs
to be cleaned.
Icemaker is
making too
sensor) is obstructed
much ice.
(Ice Maker
installed only).
Possible causes
Solutions
It may take up to 24 hours for each compartment to
reach the desired temperature and for the icemaker
to begin making ice.
that it is in the ON (I) position.
Foreign substances or frost on the ice-detecting
sensor can interrupt ice production. Make sure
that the sensor area is clean at all times for proper
operation.
Connect the refrigerator to the water supply and
arm, make sure that the arm moves freely. If
your icemaker is equipped with the electronic ice
path between the two sensors.
the water pressure below the minimum amount
and result in icemaker issues. (Refer to the Water
Pressure section.)
taste and odor problems. NOTE: In some cases,
to remove all minerals/odor/taste in all water
supplies.
Ice that has been stored for too long will shrink,
become cloudy, and may develop a stale taste.
Throw away old ice and make a new supply.
Rewrap the food. Odors may migrate to the ice if
food is not wrapped properly.
See the Care and Cleaning section for more
information.
Empty and wash the bin (discard old cubes).
Make sure that the bin is completely dry before
reinstalling it.
Empty the ice bin. If your icemaker is equipped
moves freely. If your icemaker is equipped with
there is a clear path between the two sensors.
proper operation.

Publicidad

loading