Publicidad
Idiomas disponibles
Idiomas disponibles
Installation accessories
AD 724 040
Connection piece for round duct DN
125 mm
For side connection to VL, additional
adapter plate AD 724 041 is required
AD 724 041
Adapter plate for side connection from
AD 724 040 to VL
AD 854 046
Connecting piece for flat duct system
with guidance fins 1 x NW 150 mm, flat
VV 200 014
stainless steel connection strip for
combination with further Vario
appliances
VV 200 034
aluminium connection strip for
combination with further Vario
appliances
8
Operation
Thoroughly clean the appliance and accessories before
using them for the first time.
Note: VL 040 can only be operated in combination with
VL 041. All operator inputs apply to both hob ventilators.
That is to say: if you set the control knob to level 1, both
hob ventilators are operated at level 1.
Switching on
Switching off
Ventilation moulding
If the downdraft ventilation operates beside a gas-fired
appliance, a ventilation moulding LS 041 001 must be
attached when cooking. The ventilation moulding
improves the extraction behaviour for gas-fired
appliances. The ventilation moulding prevents small
flames from going out as a result of a draft.
Turn the control knob to the
right to the position you
require (0-4).
Turn the control knob to the
left to the 0 position.
Publicidad
