CARE, MAINTENANCE & CLEANING
1. Do not disconnect the tubing or remove the
inflation bulb from the arm cuff.
2. Clean the blood pressure monitor body and cuff
carefully with a slightly damp, soft cloth. Do not
press. Do not wash cuff or use chemical cleaner on
it. Never use thinner, alcohol or petrol
(gasoline) as cleaner.
3. Leaky batteries can damage the unit. Remove the
batteries when the unit will not be used for
a long time.
25
4. If the unit is stored near freezing, allow it to
acclimate to room temperature before use.
5. This blood pressure monitor is not field service-
able. You should not use any tool to open the
device nor should you attempt to adjust anything
inside the device. If you have any problems with
this device, please contact HoMedics Consumer
Relations (contact information can be found on
the warranty page).
6. Do not immerse the unit in water as this will
result in damage to the unit.
26