Orbegozo LV 3580 Manual De Instrucciones página 20

LV 3580
Cleaning the floor boards
You can put the long sprayer, the hose or just use the fixed sprayer . Then install the bended
sprayer. Aim the sprayer at the floor board, and press down the steam button to remove the dirt
and stains from the wall corners and the floor.
PARTS INSTALLATION
Long sprayer installation / Hose installation
Line up the arrow of the sprayer/hose with
the upper part of the fixed sprayer, as it is
showed in the first picture on the right.
Then turn the sprayer 90º to the right to fix
it. The arrow will be lined up with the side
line of the product, as it is showed in the
second picture on the right.
To remove it, act in inverse sense.
The process to insert the flexible hose is
the same. It also has the same mark than
the long sprayer showed in the pictures.
Round brushed or bend sprayer installation
You can put the round brushed or the bended sprayer in the fixed nozzle or in the
long sprayer. These both sprayers can be installed facing 6 different directions.
Because of that, please choose first the desired direction and insert one of them
firmly. If you want to use the long sprayer you should install the round brushed or
the bended nozzle before, and then insert the long one in the fixed nozzle according
to the previous instructions.
20