Bosch CTL9181D0 Manual Del Usuario página 58

en Basic settings
Overview of the Home Connect settings
You can find an overview of the Home Connect settings and network settings
here.
Basic setting
Home Connect
assistant
WiFi
Remote start
Software update
Note: When "WiFi" and remote start
are switched on,
display.
13.4 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
58
Selection
Start
Disconnect
On
Off
On
Off
-
appears on the
Description
Add mobile device.
Disconnect appliance from network.
Switch off the wireless module during
long absences or to save energy.
Note: In networked standby mode
your appliance requires max. 2 W.
Switch remote start on the appliance
on and off.
Note: With the Home Connect app
only switch-off is possible.
Note: This setting is only available
with a software update.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note: Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
14 Basic settings
You can configure the basic settings
for your appliance to meet your
needs and call up additional func-
tions.
14.1 Changing settings
Select "Settings".
1.
a The display shows the list of set-
tings.
Change the required setting.
2.
a The appliance saves the setting
automatically.