en Cleaning and servicing
▶
Liquids must not be spilled on the
appliance plug connection.
▶
Do not use steam- or high-pres-
sure cleaners to clean the appli-
ance.
WARNING
Risk of burns!
Some parts of the appliance become
very hot.
▶
Never touch hot appliance parts.
▶
Allow hot appliance parts to cool
down before touching.
Clean the housing, the high-gloss
1.
surfaces and the control panel with
the enclosed microfibre cloth.
Clean the beverage outlet with a
2.
soft, damp cloth after beverages
have been dispensed.
Rinse the water tank with fresh,
3.
clean water.
If the appliance has not been used
4.
for a long time, e.g. after a holiday,
clean the entire appliance, includ-
ing moving parts such as the brew-
ing unit or water tank.
Note: The appliance will rinse itself
automatically if you switch it on when
it is cold or switch it off after it has
dispensed coffee. The system is
therefore self-cleaning.
15.4 Cleaning the drip tray
and coffee dregs con-
tainer
Clean and empty the drip tray and
coffee dregs container every day to
prevent deposits. Follow the illus-
trated instructions at the beginning of
this manual.
→ Fig.
26
-
28
62
15.5 Cleaning the milk con-
tainer
Clean the milk container regularly for
hygiene reasons. You can clean the
milk container in the dishwasher. Fol-
low the illustrated instructions at the
beginning of this manual.
→ Fig.
19
-
22
15.6 Service programmes
Use the service programmes if you
insert or remove a water filter or in
order to clean your appliance thor-
oughly. Your appliance will tell you
when you need to perform a service
programme, e.g. cleaning.
ATTENTION!
Improper cleaning and descaling or a
delay in doing so may damage the
appliance.
▶
Immediately perform the descaling
process in accordance with the in-
structions.
▶
Only put cleaning tablets in the
brew chamber of the brewing unit.
▶
Do not put descaling tablets or
other products in the brew cham-
ber of the brewing unit.
Notes
¡ The display indicates the progress
of the descaling or cleaning pro-
cess.
¡ If your appliance has been locked,
you can only operate it again once
the descaling process has been
carried out.
Tip: In addition to the automatic rins-
ing process, regularly also remove
and clean the brewing unit.
Using the service programmes
Select "Care & maintenance".
1.
Press "Care & maintenance".
2.
a The display shows a list.