Veridian Healthcare 11-516CS Manual De Instrucciones página 16

USING YOUR DEVICE—
ARLARM MODES
Psound — Pulse Sound/Tone; only set as ON or OFF, when
ON the oximeter will sound a tone with every heartbeat as it
reads the user's pulse. i.e. beep-beep-beep-beep.
Alarm — Indicates whether the alarm
function is ON or OFF; all functions–
Finger Out, Reading Thresholds, and
Low Battery–are ON when this setting is
selected as ON, Fig 3.
3. Toggle the triangle cursor to Dir, press and hold to enter the
reading thresholds options.
Dir
Psound o
Alarm
Exit
4. Press and hold the POWER button to enter the SPO2 setting.
Within this setting you may select a High and Low point for
the SPO2 measurement.
Dir down, numbers will go down as you set the digits; Dir
up, numbers will go up as you set the digits. Press and hold
the power button to select the desired setting. Press and
release the power button to address each option–High, Low.
Toggle to Exit, then press and hold to exit the SPO2 menu.
16 • ENGLISH
set
o
Dir
Psound o
Alarm
Exit
Direction
Sp0 Alm
2
PR Alm
Exit
set
on
Fig. 3