Fanimation XENO FP6729B Serie Manual Del Usuario página 10

How to Assemble Your Light Kit (continued)
(Option A--for use with light kit)
4.
Connect the 2 single pin connectors from the LED
assembly to the 2 single pin connectors from motor
assembly. (Figure 4 )
CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circult to the fan before installing
light kit.
5. Assemble the LED assembly to the light kit using
the two key slots and replace the third screw and
securely tighten all three screws. (Figure 5 )
CAUTION
The light source is designed for this specific
application and can overheat if serviced by untrained
personnel. If any servicing is required, the product
should be returned to an authorized service facility
for examination or repair.
6. Secure the glass to the light kit by twisting in a
clockwise direction. Do not over-tighten. (Figure 6)
Motor
Assembly
LED Assembly
Light Kit
LED Assembly
Light Kit
Light Kit
Light Cap
Light Kit
Plastic Cap
10
Figure 4
Figure 5
Glass
Figure 6
Figure 7
Figure 8