Publicidad
Idiomas disponibles
Idiomas disponibles
3.1.1 c
hangIng the drIve confIguratIon
(Z
)
gIng
form
4
2
5
1
Loosen screws, and remove the cover (1). Loosen screw
and remove with washer (2). Loosen screws (3). By apply-
ing a 4 mm allen key anticlockwise, lower the motor with
the belt pulley. Remove screw completely (4). Draw off the
motor's belt pulley (5).
4
3
Loosen screws, and remove the cover (1). Loosen lock-
ing device (2). Insert new belt pulley and fix with locking
device (3). Insert new belt (4). Fit cover with screws (1).
3
2
1
5
Insert new motor belt pulley (1). Fit the screw together with
the washer (2). Tighten screw with a 4 mm allen key (3). Fit
cover with screws (4). Place the cover with the screws (5).
28
/ b
elt exchan
3
2
1
4
-
3.1.2 c
hangIng the drIve confIguratIon
(u
)
gIng
form
3
Loosen the screws, and remove the two covers (1). Loos-
en screws (2). By applying a 4 mm allen key anticlock-
wise, lower the motor with the belt pulley. Loosen the belt
with the screw (3).
5
Remove belt (1). Loosen screw and remove with washer
(2). Change pulley (3). Loosen locking device (4). Change
pulley (5). To install, follow the above instructions in re-
verse order. Fit new belt.
3.1.3 c
hangIng the motor
1
3
Loosen screws, and remove the cover (1). Loosen screw
and remove with washer (2). By applying a 4 mm allen key
anticlockwise, lower the motor with the pulley. Remove
screw completely (3).
/ b
elt exchan
2
1
3
2
1
4
'
s posItIon
2
-
Publicidad
