Bluetooth®
• Depending on the Bluetooth version, operating system and the
firmware version of your mobile phone, Bluetooth features may not
work with this unit.
• Be sure to turn on the Bluetooth function of the device to make the
following operations.
• Signal conditions vary depending on the surroundings.
Connect the microphone
Connect the supplied microphone to the microphone input jack on the rear
panel.
Adjust the
microphone
angle
Pair and connect a Bluetooth device for the first time
1
Press B SRC to turn on the unit.
2
Search and select the name of your receiver ("KD-DB922BT") on the
Bluetooth device.
3
Perform (A) or (B) depending on what appears on the display.
For some Bluetooth devices, pairing sequence may vary from the steps
described below.
(A) "[Device Name]"
"XXXXXX"
"XXXXXX" is a 6-digit passkey randomly generated during each pairing.
Ensure that the passkeys appear on the unit and Bluetooth device
are the same.
Press the volume knob to confirm the passkey.
Operate the Bluetooth device to confirm the passkey.
8
Secure using cord
clamps (not supplied)
if necessary.
"VOL – YES"
"BACK – NO"
(B) "[Device Name]"
"VOL – YES"
Press the volume knob to start pairing.
• If "PAIRING"
"PIN 0000" scrolls on the display, enter the PIN code
"0000" into the Bluetooth device.
• If only "PAIRING" appears, operate the Bluetooth device to confirm
pairing.
"PAIRING COMPLETED" appears when pairing is completed and " " will light
up when the Bluetooth connection is established.
Answer a call
Press
or the volume knob.
• To adjust the phone volume [00] to [35], turn the volume knob.
• To end a call, press and hold
Audio player via Bluetooth
1
Press B SRC repeatedly to select BT AUDIO.
2
Operate the audio player via Bluetooth to start playback.
To
Play back/pause
Select group or folder
Reverse skip/Forward skip
Reverse/Fast-forward
Repeat play
Random play
"BACK – NO"
or the volume knob.
On the faceplate
Press the volume knob.
Press 2 J / 1 K.
Press S / T.
Press and hold S / T.
Press 4 B repeatedly.
Press 3 A repeatedly.