Silvercrest SED 3.7 C2 Instrucciones De Uso página 63

Cleaning and Care
RISK OF ELECTRIC SHOCK
► Before cleaning, disconnect the appliance from the mains
power adapter 8 and the mains power adapter 8 from the
main power supply.
WARNING - PROPERTY DAMAGE!
GB
MT
► NEVER submerse the appliance in water or other liquids!
After every use clean the epilator head 2 with the supplied
■
cleaning brush 0 to remove loose hairs.
Disinfect the epilator head 2 regularly by spraying and cleaning
■
it with disinfectant spray.
To thoroughly clean the epilator head 2 you can remove it from
■
the appliance:
Press the two restraint fi xtures 3 together and at the same
―
time pull the epilator head 2 upwards.
Clean the epilator head 2 under running water and then
―
allow it to dry.
Place the epilator head 2 back onto the appliance. Ensure
―
that the gears on the epilator head 2 and on the appliance
mesh with each other. The epilator head 2 must audibly
engage.
Clean the appliance housing and the mains power adapter 8
■
with a moist cloth. If required, use some mild detergent on the cloth.
Ensure that the appliance is completely dry before the next use.
60
SED 3.7 C2