Restoring Factory Settings - Teac CR-H700DAB Manual Del Usuario

Audio Files
There is no sound even if the play/pause button
(y/J) is pressed.
e Check if there are playable files on the USB device.
e Non-playable file formats (e.g MPEG 1 LAYER 2 file)
cannot be played.
"Artist:[ ]", "Title:[ ]", and "Album:[
on the display.
e There is no ID3 tag information for the music file.
Edit the title, artist, and album information of the
song on a PC using an MP3 or WMA file editing
application.
Some unknown characters are displayed on the
display panel.
e This unit cannot display symbols and full-size or
double-byte characters (such as Japanese, Chinese,
etc.) correctly. File name of MP3 or WMA should be
alphanumeric characters.
If normal operation cannot be recovered, unplug
the power cord from the outlet and plug it again.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth
or use diluted neutral cleaning liquid. Be sure to remove
any fluid completely. Do not use thinner or alcohol as
they may damage the surface of the unit.

Restoring factory settings

]" appears
If the power supply is interrupted for 14 days or longer, all
the settings kept in memory (such as preset stations and
timer settings) will be erased.
It will take more than 3 days after plugging the power
cord into the outlet to charge enough electricity for the
memory backup function.
If you want to manually initialize the settings, hold
down the SOURCE button and play/pause button
(y/J) for more than 4 seconds in standby mode.
The unit will be turned on, and all the settings are reset to
the default settings.
After that, turn off the unit, unplug the power cord from
the outlet, then plug it again.
63