HAEGER Marbella Manual De Instrucciones página 6

English
Description
1. Steam button
3. Iron housing
5. Iron rest
7. Water tank
9. Base top cover
11. Steam adjustment knob
13. Thermostat knob
15. Iron indicator light
17. Base and iron connection cord
Instructions for Use
Using the appliance for the first time
IMPORTANT: When the iron is used for the first time, the steam control button
must be held down for about 1 minute until the pump starts and steam is
produced.
Before first use, the appliance must be prepared by proceeding as follows:
1. Take out the water tank from the base and pull out the
anti-scale barrel from the water tank.
2. Fill the water tank with untreated tap water - do not
exceed the MAX level.
3. Insert the cartridge and push the water tank on the base.
4. Plug in your steam system to an earthed socket, the base
indicator light will goes on.
5. Turn the thermostat control of the iron to the MAX or (•••) position, the iron
indicator light will goes on.
6. Wait for the soleplate to heat up. When it reaches the correct temperature,
the iron indicator light will goes out.
7. When the indicator light goes out three time, press on the steam control
button and hold it down or push continuous steam slide button for about
one minute (the time that it takes the pump to start and the first bursts of
steam from the appliance) without placing the iron on your garment. Once
the pump has started, press steam button a few times. Now your appliance
is ready for the first ironing session.
4
2. Continuous steam slide button
4. Iron skirt
6. Soleplate
8. Base down cover
10. Power cord
12. Power indicator light
14. Iron top cover
16. Cord guard
18. Filter Cartridge
Instruction Manual