Descargar Imprimir esta página

Parkside PHP 500 A1 Instrucciones De Utilización Y De Seguridad página 20

Publicidad

Idiomas disponibles

Idiomas disponibles

Gluing:
Press the feed clamp
glue as required for your work.
1. Apply the glue in individual dots. Apply in zig-
zags on flexible materials such as fabrics.
2. Immediately after applying the glue, press the
two materials together for about 30 seconds. The
glued joint can be loaded after about 5 minutes.
3. When you take a break from work, set the
glue gun down on the wire stand
charger
.
4
4. Remove any glue residue with a sharp knife
after cooling. Glued joints can be loosened
again by applying heat.
Switching off the device:
½
Pull the mains lead out of the mains socket.
Changing the nozzle:
½
Wear protective gloves.
Heat up the device for about 4 minutes.
Change the nozzle
½
DANGER OF BURNS! Touch the
nozzle
8
The nozzle tip is hot!
©
Maintenance and Cleaning
The glue gun is maintenance-free.
½
WARNING! Pull the mains lead out of the
mains socket before you clean the tool.
Always keep the device clean and dry.
Do not allow any liquids to enter the tool. Use
a soft cloth to clean the housing. Never use
petrol, solvents or cleaning agents that might
attack plastic.
©
Service
½
WARNING!
repaired only by qualified specialist
personnel using original manufacturer
Operation / Maintenance and Cleaning / Service / Warranty
to regulate the flow of
5
or in the
6
when it is hot.
8
only by the heat shield
Have your device
parts only. This will ensure that your device
remains safe to use.
½
WARNING!
lead needs to be replaced, always
have the replacement carried out by
the manufacturer or its service centre.
This will ensure that your device remains safe
to use.
©
Warranty
The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. Only in this
way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
9
.
nents, e.g. buttons or batteries. This product is for
private use only and is not intended for commercial
use.
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tamper-
ing not carried out by our authorized service branch.
Your statutory rights are not restricted in any way
by this warranty.
The warranty period will not be extended by repairs
made unter warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after
unpacking the appliance, at the latest, two days after
the purchase date. Repairs made after the expiration
of the warranty period are subject to payment.
GB
DES UK LTD
Tel.:
0871 5000 700 (£ 0.10 / minute)
e-mail: support.uk@kompernass.com
If the plug or mains
GB/MT
21

Publicidad

loading